Configuration

• 1: Configuration Best Practices
• 2: ConfigMaps
• 3: Secrets
• 4: Managing Resources for Containers
• 5: Organizing Cluster Access Using kubeconfig Files

1 - Configuration Best Practices

This document highlights and consolidates configuration best practices that are introduced throughout the user guide, Getting Started documentation, and examples.

This is a living document. If you think of something that is not on this list but might be useful to others, please don't hesitate to file an issue or submit a PR.

General Configuration Tips

• When defining configurations, specify the latest stable API version.

• Configuration files should be stored in version control before being pushed to the cluster. This allows you to quickly roll back a configuration change if necessary. It also aids cluster re-creation and restoration.

• Write your configuration files using YAML rather than JSON. Though these formats can be used interchangeably in almost all scenarios, YAML tends to be more user-friendly.

• Group related objects into a single file whenever it makes sense. One file is often easier to manage than several. See the guestbook-all-in-one.yaml file as an example of this syntax.

• Note also that many kubectl commands can be called on a directory. For example, you can call kubectl apply on a directory of config files.

• Don't specify default values unnecessarily: simple, minimal configuration will make errors less likely.

• Put object descriptions in annotations, to allow better introspection.

"Naked" Pods versus ReplicaSets, Deployments, and Jobs

• Don't use naked Pods (that is, Pods not bound to a ReplicaSet or Deployment) if you can avoid it. Naked Pods will not be rescheduled in the event of a node failure.

  A Deployment, which both creates a ReplicaSet to ensure that the desired number of Pods is always available, and specifies a strategy to replace Pods (such as RollingUpdate), is almost always preferable to creating Pods directly, except for some explicit restartPolicy: Never scenarios. A Job may also be appropriate.

Services

• Create a Service before its corresponding backend workloads (Deployments or ReplicaSets), and before any workloads that need to access it. When Kubernetes starts a container, it provides environment variables pointing to all the Services which were running when the container was started. For example, if a Service named foo exists, all containers will get the following variables in their initial environment:

  FOO_SERVICE_HOST=<the host the Service is running on>
  FOO_SERVICE_PORT=<the port the Service is running on>
  

  This does imply an ordering requirement - any Service that a Pod wants to access must be created before the Pod itself, or else the environment variables will not be populated. DNS does not have this restriction.

• An optional (though strongly recommended) cluster add-on is a DNS server. The DNS server watches the Kubernetes API for new Services and creates a set of DNS records for each. If DNS has been enabled throughout the cluster then all Pods should be able to do name resolution of Services automatically.

• Don't specify a hostPort for a Pod unless it is absolutely necessary. When you bind a Pod to a hostPort, it limits the number of places the Pod can be scheduled, because each <hostIP, hostPort, protocol> combination must be unique. If you don't specify the hostIP and protocol explicitly, Kubernetes will use 0.0.0.0 as the default hostIP and TCP as the default protocol.

  If you only need access to the port for debugging purposes, you can use the apiserver proxy or kubectl port-forward.

  If you explicitly need to expose a Pod's port on the node, consider using a NodePort Service before resorting to hostPort.

• Avoid using hostNetwork, for the same reasons as hostPort.

• Use headless Services (which have a ClusterIP of None) for service discovery when you don't need kube-proxy load balancing.

Using Labels

• Define and use labels that identify semantic attributes of your application or Deployment, such as { app: myapp, tier: frontend, phase: test, deployment: v3 }. You can use these labels to select the appropriate Pods for other resources; for example, a Service that selects all tier: frontend Pods, or all phase: test components of app: myapp. See the guestbook app for examples of this approach.

A Service can be made to span multiple Deployments by omitting release-specific labels from its selector. When you need to update a running service without downtime, use a Deployment.

A desired state of an object is described by a Deployment, and if changes to that spec are applied, the deployment controller changes the actual state to the desired state at a controlled rate.

• Use the Kubernetes common labels for common use cases. These standardized labels enrich the metadata in a way that allows tools, including kubectl and dashboard, to work in an interoperable way.

• You can manipulate labels for debugging. Because Kubernetes controllers (such as ReplicaSet) and Services match to Pods using selector labels, removing the relevant labels from a Pod will stop it from being considered by a controller or from being served traffic by a Service. If you remove the labels of an existing Pod, its controller will create a new Pod to take its place. This is a useful way to debug a previously "live" Pod in a "quarantine" environment. To interactively remove or add labels, use kubectl label.

Using kubectl

• Use kubectl apply -f <directory>. This looks for Kubernetes configuration in all .yaml, .yml, and .json files in <directory> and passes it to apply.

• Use label selectors for get and delete operations instead of specific object names. See the sections on label selectors and using labels effectively.

• Use kubectl create deployment and kubectl expose to quickly create single-container Deployments and Services. See Use a Service to Access an Application in a Cluster for an example.

2 - ConfigMaps

A ConfigMap is an API object used to store non-confidential data in key-value pairs. Pods can consume ConfigMaps as environment variables, command-line arguments, or as configuration files in a volume.

A ConfigMap allows you to decouple environment-specific configuration from your container images, so that your applications are easily portable.

Caution: ConfigMap does not provide secrecy or encryption. If the data you want to store are confidential, use a Secret rather than a ConfigMap, or use additional (third party) tools to keep your data private.

Motivation

Use a ConfigMap for setting configuration data separately from application code.

For example, imagine that you are developing an application that you can run on your own computer (for development) and in the cloud (to handle real traffic). You write the code to look in an environment variable named DATABASE_HOST. Locally, you set that variable to localhost. In the cloud, you set it to refer to a Kubernetes Service that exposes the database component to your cluster. This lets you fetch a container image running in the cloud and debug the exact same code locally if needed.

A ConfigMap is not designed to hold large chunks of data. The data stored in a ConfigMap cannot exceed 1 MiB. If you need to store settings that are larger than this limit, you may want to consider mounting a volume or use a separate database or file service.

ConfigMap object

A ConfigMap is an API object that lets you store configuration for other objects to use. Unlike most Kubernetes objects that have a spec, a ConfigMap has data and binaryData fields. These fields accept key-value pairs as their values. Both the data field and the binaryData are optional. The data field is designed to contain UTF-8 byte sequences while the binaryData field is designed to contain binary data as base64-encoded strings.

The name of a ConfigMap must be a valid DNS subdomain name.

Each key under the data or the binaryData field must consist of alphanumeric characters, -, _ or .. The keys stored in data must not overlap with the keys in the binaryData field.

Starting from v1.19, you can add an immutable field to a ConfigMap definition to create an immutable ConfigMap.

ConfigMaps and Pods

You can write a Pod spec that refers to a ConfigMap and configures the container(s) in that Pod based on the data in the ConfigMap. The Pod and the ConfigMap must be in the same namespace.

Note: The spec of a static Pod cannot refer to a ConfigMap or any other API objects.

Here's an example ConfigMap that has some keys with single values, and other keys where the value looks like a fragment of a configuration format.

apiVersion: v1
kind: ConfigMap
metadata:
  name: game-demo
data:
  # property-like keys; each key maps to a simple value
  player_initial_lives: "3"
  ui_properties_file_name: "user-interface.properties"

  # file-like keys
  game.properties: |
    enemy.types=aliens,monsters
    player.maximum-lives=5    
  user-interface.properties: |
    color.good=purple
    color.bad=yellow
    allow.textmode=true    

There are four different ways that you can use a ConfigMap to configure a container inside a Pod:

1. Inside a container command and args
2. Environment variables for a container
3. Add a file in read-only volume, for the application to read
4. Write code to run inside the Pod that uses the Kubernetes API to read a ConfigMap

These different methods lend themselves to different ways of modeling the data being consumed. For the first three methods, the kubelet uses the data from the ConfigMap when it launches container(s) for a Pod.

The fourth method means you have to write code to read the ConfigMap and its data. However, because you're using the Kubernetes API directly, your application can subscribe to get updates whenever the ConfigMap changes, and react when that happens. By accessing the Kubernetes API directly, this technique also lets you access a ConfigMap in a different namespace.

Here's an example Pod that uses values from game-demo to configure a Pod:

apiVersion: v1
kind: Pod
metadata:
  name: configmap-demo-pod
spec:
  containers:
    - name: demo
      image: alpine
      command: ["sleep", "3600"]
      env:
        # Define the environment variable
        - name: PLAYER_INITIAL_LIVES # Notice that the case is different here
                                     # from the key name in the ConfigMap.
          valueFrom:
            configMapKeyRef:
              name: game-demo           # The ConfigMap this value comes from.
              key: player_initial_lives # The key to fetch.
        - name: UI_PROPERTIES_FILE_NAME
          valueFrom:
            configMapKeyRef:
              name: game-demo
              key: ui_properties_file_name
      volumeMounts:
      - name: config
        mountPath: "/config"
        readOnly: true
  volumes:
    # You set volumes at the Pod level, then mount them into containers inside that Pod
    - name: config
      configMap:
        # Provide the name of the ConfigMap you want to mount.
        name: game-demo
        # An array of keys from the ConfigMap to create as files
        items:
        - key: "game.properties"
          path: "game.properties"
        - key: "user-interface.properties"
          path: "user-interface.properties"

A ConfigMap doesn't differentiate between single line property values and multi-line file-like values. What matters is how Pods and other objects consume those values.

For this example, defining a volume and mounting it inside the demo container as /config creates two files, /config/game.properties and /config/user-interface.properties, even though there are four keys in the ConfigMap. This is because the Pod definition specifies an items array in the volumes section. If you omit the items array entirely, every key in the ConfigMap becomes a file with the same name as the key, and you get 4 files.

Using ConfigMaps

ConfigMaps can be mounted as data volumes. ConfigMaps can also be used by other parts of the system, without being directly exposed to the Pod. For example, ConfigMaps can hold data that other parts of the system should use for configuration.

The most common way to use ConfigMaps is to configure settings for containers running in a Pod in the same namespace. You can also use a ConfigMap separately.

For example, you might encounter addons or operators that adjust their behavior based on a ConfigMap.

Using ConfigMaps as files from a Pod

To consume a ConfigMap in a volume in a Pod:

1. Create a ConfigMap or use an existing one. Multiple Pods can reference the same ConfigMap.
2. Modify your Pod definition to add a volume under .spec.volumes[]. Name the volume anything, and have a .spec.volumes[].configMap.name field set to reference your ConfigMap object.
3. Add a .spec.containers[].volumeMounts[] to each container that needs the ConfigMap. Specify .spec.containers[].volumeMounts[].readOnly = true and .spec.containers[].volumeMounts[].mountPath to an unused directory name where you would like the ConfigMap to appear.
4. Modify your image or command line so that the program looks for files in that directory. Each key in the ConfigMap data map becomes the filename under mountPath.

This is an example of a Pod that mounts a ConfigMap in a volume:

apiVersion: v1
kind: Pod
metadata:
  name: mypod
spec:
  containers:
  - name: mypod
    image: redis
    volumeMounts:
    - name: foo
      mountPath: "/etc/foo"
      readOnly: true
  volumes:
  - name: foo
    configMap:
      name: myconfigmap

Each ConfigMap you want to use needs to be referred to in .spec.volumes.

If there are multiple containers in the Pod, then each container needs its own volumeMounts block, but only one .spec.volumes is needed per ConfigMap.

Mounted ConfigMaps are updated automatically

When a ConfigMap currently consumed in a volume is updated, projected keys are eventually updated as well. The kubelet checks whether the mounted ConfigMap is fresh on every periodic sync. However, the kubelet uses its local cache for getting the current value of the ConfigMap. The type of the cache is configurable using the ConfigMapAndSecretChangeDetectionStrategy field in the KubeletConfiguration struct. A ConfigMap can be either propagated by watch (default), ttl-based, or by redirecting all requests directly to the API server. As a result, the total delay from the moment when the ConfigMap is updated to the moment when new keys are projected to the Pod can be as long as the kubelet sync period + cache propagation delay, where the cache propagation delay depends on the chosen cache type (it equals to watch propagation delay, ttl of cache, or zero correspondingly).

ConfigMaps consumed as environment variables are not updated automatically and require a pod restart.

Immutable ConfigMaps

The Kubernetes feature Immutable Secrets and ConfigMaps provides an option to set individual Secrets and ConfigMaps as immutable. For clusters that extensively use ConfigMaps (at least tens of thousands of unique ConfigMap to Pod mounts), preventing changes to their data has the following advantages:

• protects you from accidental (or unwanted) updates that could cause applications outages
• improves performance of your cluster by significantly reducing load on kube-apiserver, by closing watches for ConfigMaps marked as immutable.

This feature is controlled by the ImmutableEphemeralVolumes feature gate. You can create an immutable ConfigMap by setting the immutable field to true. For example:

apiVersion: v1
kind: ConfigMap
metadata:
  ...
data:
  ...
immutable: true

Once a ConfigMap is marked as immutable, it is not possible to revert this change nor to mutate the contents of the data or the binaryData field. You can only delete and recreate the ConfigMap. Because existing Pods maintain a mount point to the deleted ConfigMap, it is recommended to recreate these pods.

What's next

• Read about Secrets.
• Read Configure a Pod to Use a ConfigMap.
• Read The Twelve-Factor App to understand the motivation for separating code from configuration.

3 - Secrets

A Secret is an object that contains a small amount of sensitive data such as a password, a token, or a key. Such information might otherwise be put in a Pod specification or in a container image. Using a Secret means that you don't need to include confidential data in your application code.

Because Secrets can be created independently of the Pods that use them, there is less risk of the Secret (and its data) being exposed during the workflow of creating, viewing, and editing Pods. Kubernetes, and applications that run in your cluster, can also take additional precautions with Secrets, such as avoiding writing confidential data to nonvolatile storage.

Secrets are similar to ConfigMaps but are specifically intended to hold confidential data.

Caution:

Kubernetes Secrets are, by default, stored unencrypted in the API server's underlying data store (etcd). Anyone with API access can retrieve or modify a Secret, and so can anyone with access to etcd. Additionally, anyone who is authorized to create a Pod in a namespace can use that access to read any Secret in that namespace; this includes indirect access such as the ability to create a Deployment.

In order to safely use Secrets, take at least the following steps:

1. Enable Encryption at Rest for Secrets.
2. Enable or configure RBAC rules that restrict reading data in Secrets (including via indirect means).
3. Where appropriate, also use mechanisms such as RBAC to limit which principals are allowed to create new Secrets or replace existing ones.

Overview of Secrets

To use a Secret, a Pod needs to reference the Secret. A Secret can be used with a Pod in three ways:

• As files in a volume mounted on one or more of its containers.
• As container environment variable.
• By the kubelet when pulling images for the Pod.

The Kubernetes control plane also uses Secrets; for example, bootstrap token Secrets are a mechanism to help automate node registration.

The name of a Secret object must be a valid DNS subdomain name. You can specify the data and/or the stringData field when creating a configuration file for a Secret. The data and the stringData fields are optional. The values for all keys in the data field have to be base64-encoded strings. If the conversion to base64 string is not desirable, you can choose to specify the stringData field instead, which accepts arbitrary strings as values.

The keys of data and stringData must consist of alphanumeric characters, -, _ or .. All key-value pairs in the stringData field are internally merged into the data field. If a key appears in both the data and the stringData field, the value specified in the stringData field takes precedence.

Types of Secret

When creating a Secret, you can specify its type using the type field of a Secret resource, or certain equivalent kubectl command line flags (if available). The type of a Secret is used to facilitate programmatic handling of different kinds of confidential data.

Kubernetes provides several builtin types for some common usage scenarios. These types vary in terms of the validations performed and the constraints Kubernetes imposes on them.

You can define and use your own Secret type by assigning a non-empty string as the type value for a Secret object. An empty string is treated as an Opaque type. Kubernetes doesn't impose any constraints on the type name. However, if you are using one of the builtin types, you must meet all the requirements defined for that type.

Opaque secrets

Opaque is the default Secret type if omitted from a Secret configuration file. When you create a Secret using kubectl, you will use the generic subcommand to indicate an Opaque Secret type. For example, the following command creates an empty Secret of type Opaque.

kubectl create secret generic empty-secret
kubectl get secret empty-secret

The output looks like:

NAME           TYPE     DATA   AGE
empty-secret   Opaque   0      2m6s

The DATA column shows the number of data items stored in the Secret. In this case, 0 means we have created an empty Secret.

Service account token Secrets

A kubernetes.io/service-account-token type of Secret is used to store a token that identifies a service account. When using this Secret type, you need to ensure that the kubernetes.io/service-account.name annotation is set to an existing service account name. A Kubernetes controller fills in some other fields such as the kubernetes.io/service-account.uid annotation and the token key in the data field set to actual token content.

The following example configuration declares a service account token Secret:

apiVersion: v1
kind: Secret
metadata:
  name: secret-sa-sample
  annotations:
    kubernetes.io/service-account.name: "sa-name"
type: kubernetes.io/service-account-token
data:
  # You can include additional key value pairs as you do with Opaque Secrets
  extra: YmFyCg==

When creating a Pod, Kubernetes automatically creates a service account Secret and automatically modifies your Pod to use this Secret. The service account token Secret contains credentials for accessing the API.

The automatic creation and use of API credentials can be disabled or overridden if desired. However, if all you need to do is securely access the API server, this is the recommended workflow.

See the ServiceAccount documentation for more information on how service accounts work. You can also check the automountServiceAccountToken field and the serviceAccountName field of the Pod for information on referencing service account from Pods.

Docker config Secrets

You can use one of the following type values to create a Secret to store the credentials for accessing a Docker registry for images.

• kubernetes.io/dockercfg
• kubernetes.io/dockerconfigjson

The kubernetes.io/dockercfg type is reserved to store a serialized ~/.dockercfg which is the legacy format for configuring Docker command line. When using this Secret type, you have to ensure the Secret data field contains a .dockercfg key whose value is content of a ~/.dockercfg file encoded in the base64 format.

The kubernetes.io/dockerconfigjson type is designed for storing a serialized JSON that follows the same format rules as the ~/.docker/config.json file which is a new format for ~/.dockercfg. When using this Secret type, the data field of the Secret object must contain a .dockerconfigjson key, in which the content for the ~/.docker/config.json file is provided as a base64 encoded string.

Below is an example for a kubernetes.io/dockercfg type of Secret:

apiVersion: v1
kind: Secret
metadata:
  name: secret-dockercfg
type: kubernetes.io/dockercfg
data:
  .dockercfg: |
        "<base64 encoded ~/.dockercfg file>"

Note: If you do not want to perform the base64 encoding, you can choose to use the stringData field instead.

When you create these types of Secrets using a manifest, the API server checks whether the expected key does exists in the data field, and it verifies if the value provided can be parsed as a valid JSON. The API server doesn't validate if the JSON actually is a Docker config file.

When you do not have a Docker config file, or you want to use kubectl to create a Docker registry Secret, you can do:

kubectl create secret docker-registry secret-tiger-docker \
  --docker-username=tiger \
  --docker-password=pass113 \
  --docker-email=tiger@acme.com \
  --docker-server=my-registry.example:5000

This command creates a Secret of type kubernetes.io/dockerconfigjson. If you dump the .dockerconfigjson content from the data field, you will get the following JSON content which is a valid Docker configuration created on the fly:

{
    "apiVersion": "v1",
    "data": {
        ".dockerconfigjson": "eyJhdXRocyI6eyJteS1yZWdpc3RyeTo1MDAwIjp7InVzZXJuYW1lIjoidGlnZXIiLCJwYXNzd29yZCI6InBhc3MxMTMiLCJlbWFpbCI6InRpZ2VyQGFjbWUuY29tIiwiYXV0aCI6ImRHbG5aWEk2Y0dGemN6RXhNdz09In19fQ=="
    },
    "kind": "Secret",
    "metadata": {
        "creationTimestamp": "2021-07-01T07:30:59Z",
        "name": "secret-tiger-docker",
        "namespace": "default",
        "resourceVersion": "566718",
        "uid": "e15c1d7b-9071-4100-8681-f3a7a2ce89ca"
    },
    "type": "kubernetes.io/dockerconfigjson"
}

Basic authentication Secret

The kubernetes.io/basic-auth type is provided for storing credentials needed for basic authentication. When using this Secret type, the data field of the Secret must contain the following two keys:

• username: the user name for authentication;
• password: the password or token for authentication.

Both values for the above two keys are base64 encoded strings. You can, of course, provide the clear text content using the stringData for Secret creation.

The following YAML is an example config for a basic authentication Secret:

apiVersion: v1
kind: Secret
metadata:
  name: secret-basic-auth
type: kubernetes.io/basic-auth
stringData:
  username: admin
  password: t0p-Secret

The basic authentication Secret type is provided only for user's convenience. You can create an Opaque for credentials used for basic authentication. However, using the builtin Secret type helps unify the formats of your credentials and the API server does verify if the required keys are provided in a Secret configuration.

SSH authentication secrets

The builtin type kubernetes.io/ssh-auth is provided for storing data used in SSH authentication. When using this Secret type, you will have to specify a ssh-privatekey key-value pair in the data (or stringData) field as the SSH credential to use.

The following YAML is an example config for a SSH authentication Secret:

apiVersion: v1
kind: Secret
metadata:
  name: secret-ssh-auth
type: kubernetes.io/ssh-auth
data:
  # the data is abbreviated in this example
  ssh-privatekey: |
          MIIEpQIBAAKCAQEAulqb/Y ...

The SSH authentication Secret type is provided only for user's convenience. You can create an Opaque for credentials used for SSH authentication. However, using the builtin Secret type helps unify the formats of your credentials and the API server does verify if the required keys are provided in a Secret configuration.

Caution: SSH private keys do not establish trusted communication between an SSH client and host server on their own. A secondary means of establishing trust is needed to mitigate "man in the middle" attacks, such as a known_hosts file added to a ConfigMap.

TLS secrets

Kubernetes provides a builtin Secret type kubernetes.io/tls for storing a certificate and its associated key that are typically used for TLS . This data is primarily used with TLS termination of the Ingress resource, but may be used with other resources or directly by a workload. When using this type of Secret, the tls.key and the tls.crt key must be provided in the data (or stringData) field of the Secret configuration, although the API server doesn't actually validate the values for each key.

The following YAML contains an example config for a TLS Secret:

apiVersion: v1
kind: Secret
metadata:
  name: secret-tls
type: kubernetes.io/tls
data:
  # the data is abbreviated in this example
  tls.crt: |
        MIIC2DCCAcCgAwIBAgIBATANBgkqh ...
  tls.key: |
        MIIEpgIBAAKCAQEA7yn3bRHQ5FHMQ ...

The TLS Secret type is provided for user's convenience. You can create an Opaque for credentials used for TLS server and/or client. However, using the builtin Secret type helps ensure the consistency of Secret format in your project; the API server does verify if the required keys are provided in a Secret configuration.

When creating a TLS Secret using kubectl, you can use the tls subcommand as shown in the following example:

kubectl create secret tls my-tls-secret \
  --cert=path/to/cert/file \
  --key=path/to/key/file

The public/private key pair must exist beforehand. The public key certificate for --cert must be .PEM encoded (Base64-encoded DER format), and match the given private key for --key. The private key must be in what is commonly called PEM private key format, unencrypted. In both cases, the initial and the last lines from PEM (for example, --------BEGIN CERTIFICATE----- and -------END CERTIFICATE---- for a certificate) are not included.

Bootstrap token Secrets

A bootstrap token Secret can be created by explicitly specifying the Secret type to bootstrap.kubernetes.io/token. This type of Secret is designed for tokens used during the node bootstrap process. It stores tokens used to sign well known ConfigMaps.

A bootstrap token Secret is usually created in the kube-system namespace and named in the form bootstrap-token-<token-id> where <token-id> is a 6 character string of the token ID.

As a Kubernetes manifest, a bootstrap token Secret might look like the following:

apiVersion: v1
kind: Secret
metadata:
  name: bootstrap-token-5emitj
  namespace: kube-system
type: bootstrap.kubernetes.io/token
data:
  auth-extra-groups: c3lzdGVtOmJvb3RzdHJhcHBlcnM6a3ViZWFkbTpkZWZhdWx0LW5vZGUtdG9rZW4=
  expiration: MjAyMC0wOS0xM1QwNDozOToxMFo=
  token-id: NWVtaXRq
  token-secret: a3E0Z2lodnN6emduMXAwcg==
  usage-bootstrap-authentication: dHJ1ZQ==
  usage-bootstrap-signing: dHJ1ZQ==

A bootstrap type Secret has the following keys specified under data:

• token-id: A random 6 character string as the token identifier. Required.
• token-secret: A random 16 character string as the actual token secret. Required.
• description: A human-readable string that describes what the token is used for. Optional.
• expiration: An absolute UTC time using RFC3339 specifying when the token should be expired. Optional.
• usage-bootstrap-<usage>: A boolean flag indicating additional usage for the bootstrap token.
• auth-extra-groups: A comma-separated list of group names that will be authenticated as in addition to the system:bootstrappers group.

The above YAML may look confusing because the values are all in base64 encoded strings. In fact, you can create an identical Secret using the following YAML:

apiVersion: v1
kind: Secret
metadata:
  # Note how the Secret is named
  name: bootstrap-token-5emitj
  # A bootstrap token Secret usually resides in the kube-system namespace
  namespace: kube-system
type: bootstrap.kubernetes.io/token
stringData:
  auth-extra-groups: "system:bootstrappers:kubeadm:default-node-token"
  expiration: "2020-09-13T04:39:10Z"
  # This token ID is used in the name
  token-id: "5emitj"
  token-secret: "kq4gihvszzgn1p0r"
  # This token can be used for authentication
  usage-bootstrap-authentication: "true"
  # and it can be used for signing
  usage-bootstrap-signing: "true"

Creating a Secret

There are several options to create a Secret:

• create Secret using kubectl command
• create Secret from config file
• create Secret using kustomize

Editing a Secret

An existing Secret may be edited with the following command:

kubectl edit secrets mysecret

This will open the default configured editor and allow for updating the base64 encoded Secret values in the data field:

# Please edit the object below. Lines beginning with a '#' will be ignored,
# and an empty file will abort the edit. If an error occurs while saving this file will be
# reopened with the relevant failures.
#
apiVersion: v1
data:
  username: YWRtaW4=
  password: MWYyZDFlMmU2N2Rm
kind: Secret
metadata:
  annotations:
    kubectl.kubernetes.io/last-applied-configuration: { ... }
  creationTimestamp: 2016-01-22T18:41:56Z
  name: mysecret
  namespace: default
  resourceVersion: "164619"
  uid: cfee02d6-c137-11e5-8d73-42010af00002
type: Opaque

Using Secrets

Secrets can be mounted as data volumes or exposed as environment variables to be used by a container in a Pod. Secrets can also be used by other parts of the system, without being directly exposed to the Pod. For example, Secrets can hold credentials that other parts of the system should use to interact with external systems on your behalf.

Using Secrets as files from a Pod

To consume a Secret in a volume in a Pod:

1. Create a secret or use an existing one. Multiple Pods can reference the same secret.
2. Modify your Pod definition to add a volume under .spec.volumes[]. Name the volume anything, and have a .spec.volumes[].secret.secretName field equal to the name of the Secret object.
3. Add a .spec.containers[].volumeMounts[] to each container that needs the secret. Specify .spec.containers[].volumeMounts[].readOnly = true and .spec.containers[].volumeMounts[].mountPath to an unused directory name where you would like the secrets to appear.
4. Modify your image or command line so that the program looks for files in that directory. Each key in the secret data map becomes the filename under mountPath.

This is an example of a Pod that mounts a Secret in a volume:

apiVersion: v1
kind: Pod
metadata:
  name: mypod
spec:
  containers:
  - name: mypod
    image: redis
    volumeMounts:
    - name: foo
      mountPath: "/etc/foo"
      readOnly: true
  volumes:
  - name: foo
    secret:
      secretName: mysecret

Each Secret you want to use needs to be referred to in .spec.volumes.

If there are multiple containers in the Pod, then each container needs its own volumeMounts block, but only one .spec.volumes is needed per Secret.

You can package many files into one secret, or use many secrets, whichever is convenient.

Projection of Secret keys to specific paths

You can also control the paths within the volume where Secret keys are projected. You can use the .spec.volumes[].secret.items field to change the target path of each key:

apiVersion: v1
kind: Pod
metadata:
  name: mypod
spec:
  containers:
  - name: mypod
    image: redis
    volumeMounts:
    - name: foo
      mountPath: "/etc/foo"
      readOnly: true
  volumes:
  - name: foo
    secret:
      secretName: mysecret
      items:
      - key: username
        path: my-group/my-username

What will happen:

• username secret is stored under /etc/foo/my-group/my-username file instead of /etc/foo/username.
• password secret is not projected.

If .spec.volumes[].secret.items is used, only keys specified in items are projected. To consume all keys from the secret, all of them must be listed in the items field. All listed keys must exist in the corresponding secret. Otherwise, the volume is not created.

Secret files permissions

You can set the file access permission bits for a single Secret key. If you don't specify any permissions, 0644 is used by default. You can also set a default mode for the entire Secret volume and override per key if needed.

For example, you can specify a default mode like this:

apiVersion: v1
kind: Pod
metadata:
  name: mypod
spec:
  containers:
  - name: mypod
    image: redis
    volumeMounts:
    - name: foo
      mountPath: "/etc/foo"
  volumes:
  - name: foo
    secret:
      secretName: mysecret
      defaultMode: 0400

Then, the secret will be mounted on /etc/foo and all the files created by the secret volume mount will have permission 0400.

Note that the JSON spec doesn't support octal notation, so use the value 256 for 0400 permissions. If you use YAML instead of JSON for the Pod, you can use octal notation to specify permissions in a more natural way.

Note if you kubectl exec into the Pod, you need to follow the symlink to find the expected file mode. For example,

Check the secrets file mode on the pod.

kubectl exec mypod -it sh

cd /etc/foo
ls -l

The output is similar to this:

total 0
lrwxrwxrwx 1 root root 15 May 18 00:18 password -> ..data/password
lrwxrwxrwx 1 root root 15 May 18 00:18 username -> ..data/username

Follow the symlink to find the correct file mode.

cd /etc/foo/..data
ls -l

The output is similar to this:

total 8
-r-------- 1 root root 12 May 18 00:18 password
-r-------- 1 root root  5 May 18 00:18 username

You can also use mapping, as in the previous example, and specify different permissions for different files like this:

apiVersion: v1
kind: Pod
metadata:
  name: mypod
spec:
  containers:
  - name: mypod
    image: redis
    volumeMounts:
    - name: foo
      mountPath: "/etc/foo"
  volumes:
  - name: foo
    secret:
      secretName: mysecret
      items:
      - key: username
        path: my-group/my-username
        mode: 0777

In this case, the file resulting in /etc/foo/my-group/my-username will have permission value of 0777. If you use JSON, owing to JSON limitations, you must specify the mode in decimal notation, 511.

Note that this permission value might be displayed in decimal notation if you read it later.

Consuming Secret values from volumes

Inside the container that mounts a secret volume, the secret keys appear as files and the secret values are base64 decoded and stored inside these files. This is the result of commands executed inside the container from the example above:

ls /etc/foo/

The output is similar to:

username
password

cat /etc/foo/username

The output is similar to:

admin

cat /etc/foo/password

The output is similar to:

1f2d1e2e67df

The program in a container is responsible for reading the secrets from the files.

Mounted Secrets are updated automatically

When a secret currently consumed in a volume is updated, projected keys are eventually updated as well. The kubelet checks whether the mounted secret is fresh on every periodic sync. However, the kubelet uses its local cache for getting the current value of the Secret. The type of the cache is configurable using the ConfigMapAndSecretChangeDetectionStrategy field in the KubeletConfiguration struct. A Secret can be either propagated by watch (default), ttl-based, or by redirecting all requests directly to the API server. As a result, the total delay from the moment when the Secret is updated to the moment when new keys are projected to the Pod can be as long as the kubelet sync period + cache propagation delay, where the cache propagation delay depends on the chosen cache type (it equals to watch propagation delay, ttl of cache, or zero correspondingly).

Note: A container using a Secret as a subPath volume mount will not receive Secret updates.

Using Secrets as environment variables

To use a secret in an environment variable in a Pod:

1. Create a secret or use an existing one. Multiple Pods can reference the same secret.
2. Modify your Pod definition in each container that you wish to consume the value of a secret key to add an environment variable for each secret key you wish to consume. The environment variable that consumes the secret key should populate the secret's name and key in env[].valueFrom.secretKeyRef.
3. Modify your image and/or command line so that the program looks for values in the specified environment variables.

This is an example of a Pod that uses secrets from environment variables:

apiVersion: v1
kind: Pod
metadata:
  name: secret-env-pod
spec:
  containers:
  - name: mycontainer
    image: redis
    env:
      - name: SECRET_USERNAME
        valueFrom:
          secretKeyRef:
            name: mysecret
            key: username
      - name: SECRET_PASSWORD
        valueFrom:
          secretKeyRef:
            name: mysecret
            key: password
  restartPolicy: Never

Consuming Secret Values from environment variables

Inside a container that consumes a secret in the environment variables, the secret keys appear as normal environment variables containing the base64 decoded values of the secret data. This is the result of commands executed inside the container from the example above:

echo $SECRET_USERNAME

The output is similar to:

admin

echo $SECRET_PASSWORD

The output is similar to:

1f2d1e2e67df

Environment variables are not updated after a secret update

If a container already consumes a Secret in an environment variable, a Secret update will not be seen by the container unless it is restarted. There are third party solutions for triggering restarts when secrets change.

Immutable Secrets

The Kubernetes feature Immutable Secrets and ConfigMaps provides an option to set individual Secrets and ConfigMaps as immutable. For clusters that extensively use Secrets (at least tens of thousands of unique Secret to Pod mounts), preventing changes to their data has the following advantages:

• protects you from accidental (or unwanted) updates that could cause applications outages
• improves performance of your cluster by significantly reducing load on kube-apiserver, by closing watches for secrets marked as immutable.

This feature is controlled by the ImmutableEphemeralVolumes feature gate, which is enabled by default since v1.19. You can create an immutable Secret by setting the immutable field to true. For example,

apiVersion: v1
kind: Secret
metadata:
  ...
data:
  ...
immutable: true

Note: Once a Secret or ConfigMap is marked as immutable, it is not possible to revert this change nor to mutate the contents of the data field. You can only delete and recreate the Secret. Existing Pods maintain a mount point to the deleted Secret - it is recommended to recreate these pods.

Using imagePullSecrets

The imagePullSecrets field is a list of references to secrets in the same namespace. You can use an imagePullSecrets to pass a secret that contains a Docker (or other) image registry password to the kubelet. The kubelet uses this information to pull a private image on behalf of your Pod. See the PodSpec API for more information about the imagePullSecrets field.

Manually specifying an imagePullSecret

You can learn how to specify ImagePullSecrets from the container images documentation.

Arranging for imagePullSecrets to be automatically attached

You can manually create imagePullSecrets, and reference it from a ServiceAccount. Any Pods created with that ServiceAccount or created with that ServiceAccount by default, will get their imagePullSecrets field set to that of the service account. See Add ImagePullSecrets to a service account for a detailed explanation of that process.

Details

Restrictions

Secret volume sources are validated to ensure that the specified object reference actually points to an object of type Secret. Therefore, a secret needs to be created before any Pods that depend on it.

Secret resources reside in a namespace. Secrets can only be referenced by Pods in that same namespace.

Individual secrets are limited to 1MiB in size. This is to discourage creation of very large secrets which would exhaust the API server and kubelet memory. However, creation of many smaller secrets could also exhaust memory. More comprehensive limits on memory usage due to secrets is a planned feature.

The kubelet only supports the use of secrets for Pods where the secrets are obtained from the API server. This includes any Pods created using kubectl, or indirectly via a replication controller. It does not include Pods created as a result of the kubelet --manifest-url flag, its --config flag, or its REST API (these are not common ways to create Pods). The spec of a static Pod cannot refer to a Secret or any other API objects.

Secrets must be created before they are consumed in Pods as environment variables unless they are marked as optional. References to secrets that do not exist will prevent the Pod from starting.

References (secretKeyRef field) to keys that do not exist in a named Secret will prevent the Pod from starting.

Secrets used to populate environment variables by the envFrom field that have keys that are considered invalid environment variable names will have those keys skipped. The Pod will be allowed to start. There will be an event whose reason is InvalidVariableNames and the message will contain the list of invalid keys that were skipped. The example shows a pod which refers to the default/mysecret that contains 2 invalid keys: 1badkey and 2alsobad.

kubectl get events

The output is similar to:

LASTSEEN   FIRSTSEEN   COUNT     NAME            KIND      SUBOBJECT                         TYPE      REASON
0s         0s          1         dapi-test-pod   Pod                                         Warning   InvalidEnvironmentVariableNames   kubelet, 127.0.0.1      Keys [1badkey, 2alsobad] from the EnvFrom secret default/mysecret were skipped since they are considered invalid environment variable names.

Secret and Pod lifetime interaction

When a Pod is created by calling the Kubernetes API, there is no check if a referenced secret exists. Once a Pod is scheduled, the kubelet will try to fetch the secret value. If the secret cannot be fetched because it does not exist or because of a temporary lack of connection to the API server, the kubelet will periodically retry. It will report an event about the Pod explaining the reason it is not started yet. Once the secret is fetched, the kubelet will create and mount a volume containing it. None of the Pod's containers will start until all the Pod's volumes are mounted.

Use cases

Use-Case: As container environment variables

Create a secret

apiVersion: v1
kind: Secret
metadata:
  name: mysecret
type: Opaque
data:
  USER_NAME: YWRtaW4=
  PASSWORD: MWYyZDFlMmU2N2Rm

Create the Secret:

kubectl apply -f mysecret.yaml

Use envFrom to define all of the Secret's data as container environment variables. The key from the Secret becomes the environment variable name in the Pod.

apiVersion: v1
kind: Pod
metadata:
  name: secret-test-pod
spec:
  containers:
    - name: test-container
      image: k8s.gcr.io/busybox
      command: [ "/bin/sh", "-c", "env" ]
      envFrom:
      - secretRef:
          name: mysecret
  restartPolicy: Never

Use-Case: Pod with ssh keys

Create a secret containing some ssh keys:

kubectl create secret generic ssh-key-secret --from-file=ssh-privatekey=/path/to/.ssh/id_rsa --from-file=ssh-publickey=/path/to/.ssh/id_rsa.pub

The output is similar to:

secret "ssh-key-secret" created

You can also create a kustomization.yaml with a secretGenerator field containing ssh keys.

Caution: Think carefully before sending your own ssh keys: other users of the cluster may have access to the secret. Use a service account which you want to be accessible to all the users with whom you share the Kubernetes cluster, and can revoke this account if the users are compromised.

Now you can create a Pod which references the secret with the ssh key and consumes it in a volume:

apiVersion: v1
kind: Pod
metadata:
  name: secret-test-pod
  labels:
    name: secret-test
spec:
  volumes:
  - name: secret-volume
    secret:
      secretName: ssh-key-secret
  containers:
  - name: ssh-test-container
    image: mySshImage
    volumeMounts:
    - name: secret-volume
      readOnly: true
      mountPath: "/etc/secret-volume"

When the container's command runs, the pieces of the key will be available in:

/etc/secret-volume/ssh-publickey
/etc/secret-volume/ssh-privatekey

The container is then free to use the secret data to establish an ssh connection.

Use-Case: Pods with prod / test credentials

This example illustrates a Pod which consumes a secret containing production credentials and another Pod which consumes a secret with test environment credentials.

You can create a kustomization.yaml with a secretGenerator field or run kubectl create secret.

kubectl create secret generic prod-db-secret --from-literal=username=produser --from-literal=password=Y4nys7f11

The output is similar to:

secret "prod-db-secret" created

You can also create a secret for test environment credentials.

kubectl create secret generic test-db-secret --from-literal=username=testuser --from-literal=password=iluvtests

The output is similar to:

secret "test-db-secret" created

Note:

Special characters such as $, \, *, =, and ! will be interpreted by your shell and require escaping. In most shells, the easiest way to escape the password is to surround it with single quotes ('). For example, if your actual password is S!B\*d$zDsb=, you should execute the command this way:

kubectl create secret generic dev-db-secret --from-literal=username=devuser --from-literal=password='S!B\*d$zDsb='

You do not need to escape special characters in passwords from files (--from-file).

Now make the Pods:

cat <<EOF > pod.yaml
apiVersion: v1
kind: List
items:
- kind: Pod
  apiVersion: v1
  metadata:
    name: prod-db-client-pod
    labels:
      name: prod-db-client
  spec:
    volumes:
    - name: secret-volume
      secret:
        secretName: prod-db-secret
    containers:
    - name: db-client-container
      image: myClientImage
      volumeMounts:
      - name: secret-volume
        readOnly: true
        mountPath: "/etc/secret-volume"
- kind: Pod
  apiVersion: v1
  metadata:
    name: test-db-client-pod
    labels:
      name: test-db-client
  spec:
    volumes:
    - name: secret-volume
      secret:
        secretName: test-db-secret
    containers:
    - name: db-client-container
      image: myClientImage
      volumeMounts:
      - name: secret-volume
        readOnly: true
        mountPath: "/etc/secret-volume"
EOF

Add the pods to the same kustomization.yaml:

cat <<EOF >> kustomization.yaml
resources:
- pod.yaml
EOF

Apply all those objects on the API server by running:

kubectl apply -k .

Both containers will have the following files present on their filesystems with the values for each container's environment:

/etc/secret-volume/username
/etc/secret-volume/password

Note how the specs for the two Pods differ only in one field; this facilitates creating Pods with different capabilities from a common Pod template.

You could further simplify the base Pod specification by using two service accounts:

1. prod-user with the prod-db-secret
2. test-user with the test-db-secret

The Pod specification is shortened to:

apiVersion: v1
kind: Pod
metadata:
  name: prod-db-client-pod
  labels:
    name: prod-db-client
spec:
  serviceAccount: prod-db-client
  containers:
  - name: db-client-container
    image: myClientImage

Use-case: dotfiles in a secret volume

You can make your data "hidden" by defining a key that begins with a dot. This key represents a dotfile or "hidden" file. For example, when the following secret is mounted into a volume, secret-volume:

apiVersion: v1
kind: Secret
metadata:
  name: dotfile-secret
data:
  .secret-file: dmFsdWUtMg0KDQo=
---
apiVersion: v1
kind: Pod
metadata:
  name: secret-dotfiles-pod
spec:
  volumes:
  - name: secret-volume
    secret:
      secretName: dotfile-secret
  containers:
  - name: dotfile-test-container
    image: k8s.gcr.io/busybox
    command:
    - ls
    - "-l"
    - "/etc/secret-volume"
    volumeMounts:
    - name: secret-volume
      readOnly: true
      mountPath: "/etc/secret-volume"

The volume will contain a single file, called .secret-file, and the dotfile-test-container will have this file present at the path /etc/secret-volume/.secret-file.

Note: Files beginning with dot characters are hidden from the output of ls -l; you must use ls -la to see them when listing directory contents.

Use-case: Secret visible to one container in a Pod

Consider a program that needs to handle HTTP requests, do some complex business logic, and then sign some messages with an HMAC. Because it has complex application logic, there might be an unnoticed remote file reading exploit in the server, which could expose the private key to an attacker.

This could be divided into two processes in two containers: a frontend container which handles user interaction and business logic, but which cannot see the private key; and a signer container that can see the private key, and responds to simple signing requests from the frontend (for example, over localhost networking).

With this partitioned approach, an attacker now has to trick the application server into doing something rather arbitrary, which may be harder than getting it to read a file.

Best practices

Clients that use the Secret API

When deploying applications that interact with the Secret API, you should limit access using authorization policies such as RBAC.

Secrets often hold values that span a spectrum of importance, many of which can cause escalations within Kubernetes (e.g. service account tokens) and to external systems. Even if an individual app can reason about the power of the Secrets it expects to interact with, other apps within the same namespace can render those assumptions invalid.

For these reasons watch and list requests for secrets within a namespace are extremely powerful capabilities and should be avoided, since listing secrets allows the clients to inspect the values of all secrets that are in that namespace. The ability to watch and list all secrets in a cluster should be reserved for only the most privileged, system-level components.

Applications that need to access the Secret API should perform get requests on the secrets they need. This lets administrators restrict access to all secrets while white-listing access to individual instances that the app needs.

For improved performance over a looping get, clients can design resources that reference a secret then watch the resource, re-requesting the secret when the reference changes. Additionally, a "bulk watch" API to let clients watch individual resources has also been proposed, and will likely be available in future releases of Kubernetes.

Security properties

Protections

Because secrets can be created independently of the Pods that use them, there is less risk of the secret being exposed during the workflow of creating, viewing, and editing Pods. The system can also take additional precautions with Secrets, such as avoiding writing them to disk where possible.

A secret is only sent to a node if a Pod on that node requires it. The kubelet stores the secret into a tmpfs so that the secret is not written to disk storage. Once the Pod that depends on the secret is deleted, the kubelet will delete its local copy of the secret data as well.

There may be secrets for several Pods on the same node. However, only the secrets that a Pod requests are potentially visible within its containers. Therefore, one Pod does not have access to the secrets of another Pod.

There may be several containers in a Pod. However, each container in a Pod has to request the secret volume in its volumeMounts for it to be visible within the container. This can be used to construct useful security partitions at the Pod level.

On most Kubernetes distributions, communication between users and the API server, and from the API server to the kubelets, is protected by SSL/TLS. Secrets are protected when transmitted over these channels.

You can enable encryption at rest for secret data, so that the secrets are not stored in the clear into etcd.

Risks

• In the API server, secret data is stored in etcd; therefore:
  • Administrators should enable encryption at rest for cluster data (requires v1.13 or later).
  • Administrators should limit access to etcd to admin users.
  • Administrators may want to wipe/shred disks used by etcd when no longer in use.
  • If running etcd in a cluster, administrators should make sure to use SSL/TLS for etcd peer-to-peer communication.
• If you configure the secret through a manifest (JSON or YAML) file which has the secret data encoded as base64, sharing this file or checking it in to a source repository means the secret is compromised. Base64 encoding is not an encryption method and is considered the same as plain text.
• Applications still need to protect the value of secret after reading it from the volume, such as not accidentally logging it or transmitting it to an untrusted party.
• A user who can create a Pod that uses a secret can also see the value of that secret. Even if the API server policy does not allow that user to read the Secret, the user could run a Pod which exposes the secret.

What's next

• Learn how to manage Secret using kubectl
• Learn how to manage Secret using config file
• Learn how to manage Secret using kustomize
• Read the API reference for Secret

4 - Managing Resources for Containers

When you specify a Pod, you can optionally specify how much of each resource a Container needs. The most common resources to specify are CPU and memory (RAM); there are others.

When you specify the resource request for Containers in a Pod, the scheduler uses this information to decide which node to place the Pod on. When you specify a resource limit for a Container, the kubelet enforces those limits so that the running container is not allowed to use more of that resource than the limit you set. The kubelet also reserves at least the request amount of that system resource specifically for that container to use.

Requests and limits

If the node where a Pod is running has enough of a resource available, it's possible (and allowed) for a container to use more resource than its request for that resource specifies. However, a container is not allowed to use more than its resource limit.

For example, if you set a memory request of 256 MiB for a container, and that container is in a Pod scheduled to a Node with 8GiB of memory and no other Pods, then the container can try to use more RAM.

If you set a memory limit of 4GiB for that Container, the kubelet (and container runtime) enforce the limit. The runtime prevents the container from using more than the configured resource limit. For example: when a process in the container tries to consume more than the allowed amount of memory, the system kernel terminates the process that attempted the allocation, with an out of memory (OOM) error.

Limits can be implemented either reactively (the system intervenes once it sees a violation) or by enforcement (the system prevents the container from ever exceeding the limit). Different runtimes can have different ways to implement the same restrictions.

Note: If a Container specifies its own memory limit, but does not specify a memory request, Kubernetes automatically assigns a memory request that matches the limit. Similarly, if a Container specifies its own CPU limit, but does not specify a CPU request, Kubernetes automatically assigns a CPU request that matches the limit.

Resource types

CPU and memory are each a resource type. A resource type has a base unit. CPU represents compute processing and is specified in units of Kubernetes CPUs. Memory is specified in units of bytes. If you're using Kubernetes v1.14 or newer, you can specify huge page resources. Huge pages are a Linux-specific feature where the node kernel allocates blocks of memory that are much larger than the default page size.

For example, on a system where the default page size is 4KiB, you could specify a limit, hugepages-2Mi: 80Mi. If the container tries allocating over 40 2MiB huge pages (a total of 80 MiB), that allocation fails.

Note: You cannot overcommit hugepages-* resources. This is different from the memory and cpu resources.

CPU and memory are collectively referred to as compute resources, or resources. Compute resources are measurable quantities that can be requested, allocated, and consumed. They are distinct from API resources. API resources, such as Pods and Services are objects that can be read and modified through the Kubernetes API server.

Resource requests and limits of Pod and Container

Each Container of a Pod can specify one or more of the following:

• spec.containers[].resources.limits.cpu
• spec.containers[].resources.limits.memory
• spec.containers[].resources.limits.hugepages-<size>
• spec.containers[].resources.requests.cpu
• spec.containers[].resources.requests.memory
• spec.containers[].resources.requests.hugepages-<size>

Although requests and limits can only be specified on individual Containers, it is convenient to talk about Pod resource requests and limits. A Pod resource request/limit for a particular resource type is the sum of the resource requests/limits of that type for each Container in the Pod.

Resource units in Kubernetes

Meaning of CPU

Limits and requests for CPU resources are measured in cpu units. One cpu, in Kubernetes, is equivalent to 1 vCPU/Core for cloud providers and 1 hyperthread on bare-metal Intel processors.

Fractional requests are allowed. A Container with spec.containers[].resources.requests.cpu of 0.5 is guaranteed half as much CPU as one that asks for 1 CPU. The expression 0.1 is equivalent to the expression 100m, which can be read as "one hundred millicpu". Some people say "one hundred millicores", and this is understood to mean the same thing. A request with a decimal point, like 0.1, is converted to 100m by the API, and precision finer than 1m is not allowed. For this reason, the form 100m might be preferred.

CPU is always requested as an absolute quantity, never as a relative quantity; 0.1 is the same amount of CPU on a single-core, dual-core, or 48-core machine.

Meaning of memory

Limits and requests for memory are measured in bytes. You can express memory as a plain integer or as a fixed-point number using one of these suffixes: E, P, T, G, M, k. You can also use the power-of-two equivalents: Ei, Pi, Ti, Gi, Mi, Ki. For example, the following represent roughly the same value:

128974848, 129e6, 129M, 123Mi

Here's an example. The following Pod has two Containers. Each Container has a request of 0.25 cpu and 64MiB (2²⁶ bytes) of memory. Each Container has a limit of 0.5 cpu and 128MiB of memory. You can say the Pod has a request of 0.5 cpu and 128 MiB of memory, and a limit of 1 cpu and 256MiB of memory.

apiVersion: v1
kind: Pod
metadata:
  name: frontend
spec:
  containers:
  - name: app
    image: images.my-company.example/app:v4
    resources:
      requests:
        memory: "64Mi"
        cpu: "250m"
      limits:
        memory: "128Mi"
        cpu: "500m"
  - name: log-aggregator
    image: images.my-company.example/log-aggregator:v6
    resources:
      requests:
        memory: "64Mi"
        cpu: "250m"
      limits:
        memory: "128Mi"
        cpu: "500m"

How Pods with resource requests are scheduled

When you create a Pod, the Kubernetes scheduler selects a node for the Pod to run on. Each node has a maximum capacity for each of the resource types: the amount of CPU and memory it can provide for Pods. The scheduler ensures that, for each resource type, the sum of the resource requests of the scheduled Containers is less than the capacity of the node. Note that although actual memory or CPU resource usage on nodes is very low, the scheduler still refuses to place a Pod on a node if the capacity check fails. This protects against a resource shortage on a node when resource usage later increases, for example, during a daily peak in request rate.

How Pods with resource limits are run

When the kubelet starts a Container of a Pod, it passes the CPU and memory limits to the container runtime.

When using Docker:

• The spec.containers[].resources.requests.cpu is converted to its core value, which is potentially fractional, and multiplied by 1024. The greater of this number or 2 is used as the value of the --cpu-shares flag in the docker run command.

• The spec.containers[].resources.limits.cpu is converted to its millicore value and multiplied by 100. The resulting value is the total amount of CPU time in microseconds that a container can use every 100ms. A container cannot use more than its share of CPU time during this interval.

  Note: The default quota period is 100ms. The minimum resolution of CPU quota is 1ms.

• The spec.containers[].resources.limits.memory is converted to an integer, and used as the value of the --memory flag in the docker run command.

If a Container exceeds its memory limit, it might be terminated. If it is restartable, the kubelet will restart it, as with any other type of runtime failure.

If a Container exceeds its memory request, it is likely that its Pod will be evicted whenever the node runs out of memory.

A Container might or might not be allowed to exceed its CPU limit for extended periods of time. However, it will not be killed for excessive CPU usage.

To determine whether a Container cannot be scheduled or is being killed due to resource limits, see the Troubleshooting section.

Monitoring compute & memory resource usage

The resource usage of a Pod is reported as part of the Pod status.

If optional tools for monitoring are available in your cluster, then Pod resource usage can be retrieved either from the Metrics API directly or from your monitoring tools.

Local ephemeral storage

Nodes have local ephemeral storage, backed by locally-attached writeable devices or, sometimes, by RAM. "Ephemeral" means that there is no long-term guarantee about durability.

Pods use ephemeral local storage for scratch space, caching, and for logs. The kubelet can provide scratch space to Pods using local ephemeral storage to mount emptyDir volumes into containers.

The kubelet also uses this kind of storage to hold node-level container logs, container images, and the writable layers of running containers.

Caution: If a node fails, the data in its ephemeral storage can be lost.
Your applications cannot expect any performance SLAs (disk IOPS for example) from local ephemeral storage.

As a beta feature, Kubernetes lets you track, reserve and limit the amount of ephemeral local storage a Pod can consume.

Configurations for local ephemeral storage

Kubernetes supports two ways to configure local ephemeral storage on a node:

• Single filesystem
• Two filesystems

The kubelet can measure how much local storage it is using. It does this provided that:

• the LocalStorageCapacityIsolation feature gate is enabled (the feature is on by default), and
• you have set up the node using one of the supported configurations for local ephemeral storage.

If you have a different configuration, then the kubelet does not apply resource limits for ephemeral local storage.

Note: The kubelet tracks tmpfs emptyDir volumes as container memory use, rather than as local ephemeral storage.

Setting requests and limits for local ephemeral storage

You can use ephemeral-storage for managing local ephemeral storage. Each Container of a Pod can specify one or more of the following:

• spec.containers[].resources.limits.ephemeral-storage
• spec.containers[].resources.requests.ephemeral-storage

Limits and requests for ephemeral-storage are measured in bytes. You can express storage as a plain integer or as a fixed-point number using one of these suffixes: E, P, T, G, M, K. You can also use the power-of-two equivalents: Ei, Pi, Ti, Gi, Mi, Ki. For example, the following represent roughly the same value:

128974848, 129e6, 129M, 123Mi

In the following example, the Pod has two Containers. Each Container has a request of 2GiB of local ephemeral storage. Each Container has a limit of 4GiB of local ephemeral storage. Therefore, the Pod has a request of 4GiB of local ephemeral storage, and a limit of 8GiB of local ephemeral storage.

apiVersion: v1
kind: Pod
metadata:
  name: frontend
spec:
  containers:
  - name: app
    image: images.my-company.example/app:v4
    resources:
      requests:
        ephemeral-storage: "2Gi"
      limits:
        ephemeral-storage: "4Gi"
    volumeMounts:
    - name: ephemeral
      mountPath: "/tmp"
  - name: log-aggregator
    image: images.my-company.example/log-aggregator:v6
    resources:
      requests:
        ephemeral-storage: "2Gi"
      limits:
        ephemeral-storage: "4Gi"
    volumeMounts:
    - name: ephemeral
      mountPath: "/tmp"
  volumes:
    - name: ephemeral
      emptyDir: {}

How Pods with ephemeral-storage requests are scheduled

When you create a Pod, the Kubernetes scheduler selects a node for the Pod to run on. Each node has a maximum amount of local ephemeral storage it can provide for Pods. For more information, see Node Allocatable.

The scheduler ensures that the sum of the resource requests of the scheduled Containers is less than the capacity of the node.

Ephemeral storage consumption management

If the kubelet is managing local ephemeral storage as a resource, then the kubelet measures storage use in:

• emptyDir volumes, except tmpfs emptyDir volumes
• directories holding node-level logs
• writeable container layers

If a Pod is using more ephemeral storage than you allow it to, the kubelet sets an eviction signal that triggers Pod eviction.

For container-level isolation, if a Container's writable layer and log usage exceeds its storage limit, the kubelet marks the Pod for eviction.

For pod-level isolation the kubelet works out an overall Pod storage limit by summing the limits for the containers in that Pod. In this case, if the sum of the local ephemeral storage usage from all containers and also the Pod's emptyDir volumes exceeds the overall Pod storage limit, then the kubelet also marks the Pod for eviction.

Caution:

If the kubelet is not measuring local ephemeral storage, then a Pod that exceeds its local storage limit will not be evicted for breaching local storage resource limits.

However, if the filesystem space for writeable container layers, node-level logs, or emptyDir volumes falls low, the node taints itself as short on local storage and this taint triggers eviction for any Pods that don't specifically tolerate the taint.

See the supported configurations for ephemeral local storage.

The kubelet supports different ways to measure Pod storage use:

• Periodic scanning
• Filesystem project quota

Extended resources

Extended resources are fully-qualified resource names outside the kubernetes.io domain. They allow cluster operators to advertise and users to consume the non-Kubernetes-built-in resources.

There are two steps required to use Extended Resources. First, the cluster operator must advertise an Extended Resource. Second, users must request the Extended Resource in Pods.

Managing extended resources

Node-level extended resources

Node-level extended resources are tied to nodes.

Device plugin managed resources

See Device Plugin for how to advertise device plugin managed resources on each node.

Other resources

To advertise a new node-level extended resource, the cluster operator can submit a PATCH HTTP request to the API server to specify the available quantity in the status.capacity for a node in the cluster. After this operation, the node's status.capacity will include a new resource. The status.allocatable field is updated automatically with the new resource asynchronously by the kubelet. Note that because the scheduler uses the node status.allocatable value when evaluating Pod fitness, there may be a short delay between patching the node capacity with a new resource and the first Pod that requests the resource to be scheduled on that node.

Example:

Here is an example showing how to use curl to form an HTTP request that advertises five "example.com/foo" resources on node k8s-node-1 whose master is k8s-master.

curl --header "Content-Type: application/json-patch+json" \
--request PATCH \
--data '[{"op": "add", "path": "/status/capacity/example.com~1foo", "value": "5"}]' \
http://k8s-master:8080/api/v1/nodes/k8s-node-1/status

Note: In the preceding request, ~1 is the encoding for the character / in the patch path. The operation path value in JSON-Patch is interpreted as a JSON-Pointer. For more details, see IETF RFC 6901, section 3.

Cluster-level extended resources

Cluster-level extended resources are not tied to nodes. They are usually managed by scheduler extenders, which handle the resource consumption and resource quota.

You can specify the extended resources that are handled by scheduler extenders in scheduler policy configuration

Example:

The following configuration for a scheduler policy indicates that the cluster-level extended resource "example.com/foo" is handled by the scheduler extender.

• The scheduler sends a Pod to the scheduler extender only if the Pod requests "example.com/foo".
• The ignoredByScheduler field specifies that the scheduler does not check the "example.com/foo" resource in its PodFitsResources predicate.

{
  "kind": "Policy",
  "apiVersion": "v1",
  "extenders": [
    {
      "urlPrefix":"<extender-endpoint>",
      "bindVerb": "bind",
      "managedResources": [
        {
          "name": "example.com/foo",
          "ignoredByScheduler": true
        }
      ]
    }
  ]
}

Consuming extended resources

Users can consume extended resources in Pod specs like CPU and memory. The scheduler takes care of the resource accounting so that no more than the available amount is simultaneously allocated to Pods.

The API server restricts quantities of extended resources to whole numbers. Examples of valid quantities are 3, 3000m and 3Ki. Examples of invalid quantities are 0.5 and 1500m.

Note: Extended resources replace Opaque Integer Resources. Users can use any domain name prefix other than kubernetes.io which is reserved.

To consume an extended resource in a Pod, include the resource name as a key in the spec.containers[].resources.limits map in the container spec.

Note: Extended resources cannot be overcommitted, so request and limit must be equal if both are present in a container spec.

A Pod is scheduled only if all of the resource requests are satisfied, including CPU, memory and any extended resources. The Pod remains in the PENDING state as long as the resource request cannot be satisfied.

Example:

The Pod below requests 2 CPUs and 1 "example.com/foo" (an extended resource).

apiVersion: v1
kind: Pod
metadata:
  name: my-pod
spec:
  containers:
  - name: my-container
    image: myimage
    resources:
      requests:
        cpu: 2
        example.com/foo: 1
      limits:
        example.com/foo: 1

PID limiting

Process ID (PID) limits allow for the configuration of a kubelet to limit the number of PIDs that a given Pod can consume. See Pid Limiting for information.

Troubleshooting

My Pods are pending with event message failedScheduling

If the scheduler cannot find any node where a Pod can fit, the Pod remains unscheduled until a place can be found. An event is produced each time the scheduler fails to find a place for the Pod, like this:

kubectl describe pod frontend | grep -A 3 Events

Events:
  FirstSeen LastSeen   Count  From          Subobject   PathReason      Message
  36s   5s     6      {scheduler }              FailedScheduling  Failed for reason PodExceedsFreeCPU and possibly others

In the preceding example, the Pod named "frontend" fails to be scheduled due to insufficient CPU resource on the node. Similar error messages can also suggest failure due to insufficient memory (PodExceedsFreeMemory). In general, if a Pod is pending with a message of this type, there are several things to try:

• Add more nodes to the cluster.
• Terminate unneeded Pods to make room for pending Pods.
• Check that the Pod is not larger than all the nodes. For example, if all the nodes have a capacity of cpu: 1, then a Pod with a request of cpu: 1.1 will never be scheduled.

You can check node capacities and amounts allocated with the kubectl describe nodes command. For example:

kubectl describe nodes e2e-test-node-pool-4lw4

Name:            e2e-test-node-pool-4lw4
[ ... lines removed for clarity ...]
Capacity:
 cpu:                               2
 memory:                            7679792Ki
 pods:                              110
Allocatable:
 cpu:                               1800m
 memory:                            7474992Ki
 pods:                              110
[ ... lines removed for clarity ...]
Non-terminated Pods:        (5 in total)
  Namespace    Name                                  CPU Requests  CPU Limits  Memory Requests  Memory Limits
  ---------    ----                                  ------------  ----------  ---------------  -------------
  kube-system  fluentd-gcp-v1.38-28bv1               100m (5%)     0 (0%)      200Mi (2%)       200Mi (2%)
  kube-system  kube-dns-3297075139-61lj3             260m (13%)    0 (0%)      100Mi (1%)       170Mi (2%)
  kube-system  kube-proxy-e2e-test-...               100m (5%)     0 (0%)      0 (0%)           0 (0%)
  kube-system  monitoring-influxdb-grafana-v4-z1m12  200m (10%)    200m (10%)  600Mi (8%)       600Mi (8%)
  kube-system  node-problem-detector-v0.1-fj7m3      20m (1%)      200m (10%)  20Mi (0%)        100Mi (1%)
Allocated resources:
  (Total limits may be over 100 percent, i.e., overcommitted.)
  CPU Requests    CPU Limits    Memory Requests    Memory Limits
  ------------    ----------    ---------------    -------------
  680m (34%)      400m (20%)    920Mi (11%)        1070Mi (13%)

In the preceding output, you can see that if a Pod requests more than 1120m CPUs or 6.23Gi of memory, it will not fit on the node.

By looking at the Pods section, you can see which Pods are taking up space on the node.

The amount of resources available to Pods is less than the node capacity, because system daemons use a portion of the available resources. The allocatable field NodeStatus gives the amount of resources that are available to Pods. For more information, see Node Allocatable Resources.

The resource quota feature can be configured to limit the total amount of resources that can be consumed. If used in conjunction with namespaces, it can prevent one team from hogging all the resources.

My Container is terminated

Your Container might get terminated because it is resource-starved. To check whether a Container is being killed because it is hitting a resource limit, call kubectl describe pod on the Pod of interest:

kubectl describe pod simmemleak-hra99

Name:                           simmemleak-hra99
Namespace:                      default
Image(s):                       saadali/simmemleak
Node:                           kubernetes-node-tf0f/10.240.216.66
Labels:                         name=simmemleak
Status:                         Running
Reason:
Message:
IP:                             10.244.2.75
Replication Controllers:        simmemleak (1/1 replicas created)
Containers:
  simmemleak:
    Image:  saadali/simmemleak
    Limits:
      cpu:                      100m
      memory:                   50Mi
    State:                      Running
      Started:                  Tue, 07 Jul 2015 12:54:41 -0700
    Last Termination State:     Terminated
      Exit Code:                1
      Started:                  Fri, 07 Jul 2015 12:54:30 -0700
      Finished:                 Fri, 07 Jul 2015 12:54:33 -0700
    Ready:                      False
    Restart Count:              5
Conditions:
  Type      Status
  Ready     False
Events:
  FirstSeen                         LastSeen                         Count  From                              SubobjectPath                       Reason      Message
  Tue, 07 Jul 2015 12:53:51 -0700   Tue, 07 Jul 2015 12:53:51 -0700  1      {scheduler }                                                          scheduled   Successfully assigned simmemleak-hra99 to kubernetes-node-tf0f
  Tue, 07 Jul 2015 12:53:51 -0700   Tue, 07 Jul 2015 12:53:51 -0700  1      {kubelet kubernetes-node-tf0f}    implicitly required container POD   pulled      Pod container image "k8s.gcr.io/pause:0.8.0" already present on machine
  Tue, 07 Jul 2015 12:53:51 -0700   Tue, 07 Jul 2015 12:53:51 -0700  1      {kubelet kubernetes-node-tf0f}    implicitly required container POD   created     Created with docker id 6a41280f516d
  Tue, 07 Jul 2015 12:53:51 -0700   Tue, 07 Jul 2015 12:53:51 -0700  1      {kubelet kubernetes-node-tf0f}    implicitly required container POD   started     Started with docker id 6a41280f516d
  Tue, 07 Jul 2015 12:53:51 -0700   Tue, 07 Jul 2015 12:53:51 -0700  1      {kubelet kubernetes-node-tf0f}    spec.containers{simmemleak}         created     Created with docker id 87348f12526a

In the preceding example, the Restart Count: 5 indicates that the simmemleak Container in the Pod was terminated and restarted five times.

You can call kubectl get pod with the -o go-template=... option to fetch the status of previously terminated Containers:

kubectl get pod -o go-template='{{range.status.containerStatuses}}{{"Container Name: "}}{{.name}}{{"\r\nLastState: "}}{{.lastState}}{{end}}'  simmemleak-hra99

Container Name: simmemleak
LastState: map[terminated:map[exitCode:137 reason:OOM Killed startedAt:2015-07-07T20:58:43Z finishedAt:2015-07-07T20:58:43Z containerID:docker://0e4095bba1feccdfe7ef9fb6ebffe972b4b14285d5acdec6f0d3ae8a22fad8b2]]

You can see that the Container was terminated because of reason:OOM Killed, where OOM stands for Out Of Memory.

What's next

• Get hands-on experience assigning Memory resources to Containers and Pods.
• Get hands-on experience assigning CPU resources to Containers and Pods.
• For more details about the difference between requests and limits, see Resource QoS.
• Read the Container API reference
• Read the ResourceRequirements API reference
• Read about project quotas in XFS
• Read more about the kube-scheduler Policy reference (v1)

5 - Organizing Cluster Access Using kubeconfig Files

Use kubeconfig files to organize information about clusters, users, namespaces, and authentication mechanisms. The kubectl command-line tool uses kubeconfig files to find the information it needs to choose a cluster and communicate with the API server of a cluster.

Note: A file that is used to configure access to clusters is called a kubeconfig file. This is a generic way of referring to configuration files. It does not mean that there is a file named kubeconfig.

Warning: Only use kubeconfig files from trusted sources. Using a specially-crafted kubeconfig file could result in malicious code execution or file exposure. If you must use an untrusted kubeconfig file, inspect it carefully first, much as you would a shell script.

By default, kubectl looks for a file named config in the $HOME/.kube directory. You can specify other kubeconfig files by setting the KUBECONFIG environment variable or by setting the --kubeconfig flag.

For step-by-step instructions on creating and specifying kubeconfig files, see Configure Access to Multiple Clusters.

Supporting multiple clusters, users, and authentication mechanisms

Suppose you have several clusters, and your users and components authenticate in a variety of ways. For example:

• A running kubelet might authenticate using certificates.
• A user might authenticate using tokens.
• Administrators might have sets of certificates that they provide to individual users.

With kubeconfig files, you can organize your clusters, users, and namespaces. You can also define contexts to quickly and easily switch between clusters and namespaces.

Context

A context element in a kubeconfig file is used to group access parameters under a convenient name. Each context has three parameters: cluster, namespace, and user. By default, the kubectl command-line tool uses parameters from the current context to communicate with the cluster.

To choose the current context:

kubectl config use-context

The KUBECONFIG environment variable

The KUBECONFIG environment variable holds a list of kubeconfig files. For Linux and Mac, the list is colon-delimited. For Windows, the list is semicolon-delimited. The KUBECONFIG environment variable is not required. If the KUBECONFIG environment variable doesn't exist, kubectl uses the default kubeconfig file, $HOME/.kube/config.

If the KUBECONFIG environment variable does exist, kubectl uses an effective configuration that is the result of merging the files listed in the KUBECONFIG environment variable.

Merging kubeconfig files

To see your configuration, enter this command:

kubectl config view

As described previously, the output might be from a single kubeconfig file, or it might be the result of merging several kubeconfig files.

Here are the rules that kubectl uses when it merges kubeconfig files:

1. If the --kubeconfig flag is set, use only the specified file. Do not merge. Only one instance of this flag is allowed.

   Otherwise, if the KUBECONFIG environment variable is set, use it as a list of files that should be merged. Merge the files listed in the KUBECONFIG environment variable according to these rules:

   • Ignore empty filenames.
   • Produce errors for files with content that cannot be deserialized.
   • The first file to set a particular value or map key wins.
   • Never change the value or map key. Example: Preserve the context of the first file to set current-context. Example: If two files specify a red-user, use only values from the first file's red-user. Even if the second file has non-conflicting entries under red-user, discard them.

   For an example of setting the KUBECONFIG environment variable, see Setting the KUBECONFIG environment variable.

   Otherwise, use the default kubeconfig file, $HOME/.kube/config, with no merging.

2. Determine the context to use based on the first hit in this chain:

   1. Use the --context command-line flag if it exists.
   2. Use the current-context from the merged kubeconfig files.

   An empty context is allowed at this point.

3. Determine the cluster and user. At this point, there might or might not be a context. Determine the cluster and user based on the first hit in this chain, which is run twice: once for user and once for cluster:

   1. Use a command-line flag if it exists: --user or --cluster.
   2. If the context is non-empty, take the user or cluster from the context.

   The user and cluster can be empty at this point.

4. Determine the actual cluster information to use. At this point, there might or might not be cluster information. Build each piece of the cluster information based on this chain; the first hit wins:

   1. Use command line flags if they exist: --server, --certificate-authority, --insecure-skip-tls-verify.
   2. If any cluster information attributes exist from the merged kubeconfig files, use them.
   3. If there is no server location, fail.

5. Determine the actual user information to use. Build user information using the same rules as cluster information, except allow only one authentication technique per user:

   1. Use command line flags if they exist: --client-certificate, --client-key, --username, --password, --token.
   2. Use the user fields from the merged kubeconfig files.
   3. If there are two conflicting techniques, fail.

6. For any information still missing, use default values and potentially prompt for authentication information.

File references

File and path references in a kubeconfig file are relative to the location of the kubeconfig file. File references on the command line are relative to the current working directory. In $HOME/.kube/config, relative paths are stored relatively, and absolute paths are stored absolutely.

What's next

• Configure Access to Multiple Clusters
• kubectl config